Glaspore Foams
Glaspore Foams (also known as Pre-polymer Types) are polyester foams that are manufactured by a special process and have excellent mechanical stability. Very good abrasion and tear resistance give these special foams an extraordinary tenacity.
They are used for:
- Abrasive sponges
- Massage sponges
- Paint rollers
- Polishing discs
- Shoe polish dispensers
GlasporeFoam Range
|
Density Kg/M³ |
Hardness kPa |
Tensile kPa |
Elongation % |
PPC |
| 28 | 4 | >=60 | >=80 | 8 |
| 32 | 5.3 | >=105 | >=130 | 8 |
| 35 | 5.5 | 80 | 170 | 3 |
| 35 | 5.5 | 100 | 200 | 4 |
| 35 | 5.5 | 120 | 200 | 8 |
| 35 | 5.5 | 150 | 250 | 12 |
| 35 | 6.0 | 100 | 80 | 4 |
| 35 | 6.0 | 100 | 80 | 3 |
| 35 | 7.0 | 130 | 100 | 5 |
| 35 | 7.0 | 230 | 180 | 7 |
| 35 | 8.5 | 125 | 100 | 6 |
| 35 | 50.0 | 250 | 40 | 5 |
| 37 | 7.0 | 450 | 230 | 22 |
| 37 | 30.0 | 180 | 50 | 4 |
| 38 | 8.0 | 350 | 220 | 8 |
| 39 | 8.5 | 200 | 200 | 24 |
| 39 | 9.5 | 200 | 250 | 32 |
| 39 | 8.5 | 300 | 300 | 32 |
| 40 | 5.0 | 400 | 400 | 22 |
| 40 | 7.0 | 240 | 230 | 5 |
| 41 | 50.0 | 560 | 150 | 18 |
| 44 | 6.0 | 530 | 500 | 22 |
| 45 | 8.0 | 500 | 280 | 22 |
| 45 | 8.0 | 500 | 300 | 22 |
1 = 1st compression load curve
The above data are the mean values from production. Rights to alterations and system immanent tolerances are reserved
This information and our application technology consultation in the form of words, written material or trials, is provided to the best of our knowledge and may only be considered as non binding reference. Consultation does not relieve our customers of the obligation to carry out their own check of our products with regard to suitability for the intended process and purpose. The application, use or processing of our products, and the products manufactured by our customers on the basis of our application technology consultation, takes place outside our control and therefore lies completely in their responsibility. The sale of our products is subject to our current terms and conditions of sale.